|
Minnesota Division
The Minnesota Division has been providing engineering and contract manufacturing services for over 30 years. The division has six world class engineering and manufacturing facilities, four in Winona, MN, one in New Brighton, MN, and one in Rochester MN. Minnesota is home to the headquarters of 20 fortune 500 companies, and has major facilities for industry leaders in the test & instrumentation, aerospace, telecommunication, high end computer and medical device industries.
Contact Information
Paul Rice
4065 Theurer Blvd.
Winona, Minnesota 55987
USA
Int. Number: +001 507-452-8932
Local Number: 1 507-452-8932
Minnesota Profile
This world class site manufactures high quality printed circuit board assemblies and
system integration products for medical, aerospace/defense, telecommunications,
networking, industrial, test and instrumentation, and computer OEMs. It also houses
the Benchmark U.S. product development and design group.
The Minnesota site is FDA registered and a manufacturer of record for multiple class 3
medical products. It also has an ITAR compliant facility (US Export Control per USC
Title 22). Finally, it has a
certified on-site IPC A 610 Master Instructor and is an IPC Authorized Training Center.
Services Offered
The Minnesota site offers a complete spectrum of services to support
full product life cycle including: Prototype, New Product Introduction,
Production, End-of-Life Management, Materials Management,
Concurrent Engineering, Order Fulfillment, Depot Repair, Process
Development, & Product Development & Design.
| Square Footage: |
466,000 square feet; 6 facilities |
| Manufacturing Technologies: |
- SMT – 0201, Fine Pitch (16 mil), BGA, Micro BGA
- Direct Chip Attach (Class 10,000 Clean Room)
- PTH – Auto Insert Capabilities
- Configurable Systems Integration Lines
- Flying Probe, ICT and Functional Test
- HALT & HASS capabilities
- X-Ray Laminography and Automated Optical Inspection
- Inert Soldering (Convection Reflow, Wave, and Robotic)
- No-Clean and Aqueous Chemistries
- Dedicated Lead Free Assembly Line
- Large Board Capability to 20" x 24"
- Flex Assembly Experience
- Corporate Failure Analysis Laboratory
|
| Manufacturing Lines: |
16 SMT lines, 2 PTH lines, 12 Systems Integration Lines |
| Certifications: |
ISO 9001:2000, TL9000 Registered, FDA QSR Compliant, ISO-13485:2003, ANSI/ESD 20:20, AS 9100B, ISO 14001:2004 |
Driving Instructions
Winona, Minnesota Facilities Driving Instructions
Phone Number: 507-452-8932
From Minneapolis Airport to Benchmark Electronics Winona Division (Approximately 110 Miles)
Take Hwy 494 East
Follow 494 to the Dodd Road Exit
Exit to Hwy 55 South (Dodd Road) which runs into Hwy 52 South
Follow Hwy 52 to Hwy 50
Go East on Hwy 50
Follow Hwy 50 to Hwy 61
Go South on Hwy 61
Follow Hwy 61 to Winona, MN
Turn Left onto Pelzer Street
Follow Pelzer Street to Theurer Blvd.
Turn Left onto Theurer Blvd.
Follow Theurer Blvd to Benchmark Electronics which is on the Left
Rochester, Minnesota Facility Driving Instructions
Phone Number: 507-535-4000
From Minneapolis Airport to Benchmark Electronics Rochester Facility (approximately 70 Miles)
Take Hwy 494 East
Follow 494 to the Dodd Road Exit
Exit to Hwy 55 South (Dodd Road) which runs into Hwy 52 South
Follow Hwy 52 to Rochester
Exit on 55th St N.W. ramp. Turn Right onto 55th Street NW (Highway 22).
At 3rd Lighted Intersection, Turn Left on Valleyhigh Rd NW.
After about (1/2) mile, Turn Right onto Technology Drive
New Brighton, Minnesota Facility Driving Instructions
Phone Number: 651-636-0426
From Minneapolis Airport to Benchmark Electronics New Brighton Facility (approximately 16 Miles)
Follow the Airport Exit (Glumack Drive)
Take left ramp onto MN-5 East towards St. Paul/Minneapolis MN-55
Take the Minneapolis/MN-55/Fort Snelling/Mendota Bridge exit onto MN-55 West
Take the Hiawatha Avenue/MN-55/Minnehaha Avenue exit onto Hiawatha Ave (MN-55 West)
Take ramp onto I-35W North
Take exit #25A toward County Road D
Turn left on County Road D. Take a right at the next stop light into the New Brighton Business Plaza.
|
