|
Guadalajara, Mexico
The 160,000 square foot site is located in the Guadalajara Industrial Park, very close to the Guadalajara International Airport. The facility, which is ISO 9002 certified, TL 9000 registered, and GMP compliant, operates continuous flow manufacturing processes, with surface mount technology (SMT) and pin through hole (PTH) lines, as well as box build capability.
Contact Information
Hugo Haussner
Circuito de la Productividad No. 132-A
Parque Industrial Guadalajara
El Salto, Jalisco 45690
Mexico
Int. Number: +52 33-3-668-5200
Local Number: 3-668-5200
Guadalajara, Mexico Profile
The 160,000 square feet site is located in the Guadalajara Industrial Park, very close to the Guadalajara International Airport. The facility, which is
ISO 9002 certified, TL 9000 registered, and GMP compliant, operates continuous flow manufacturing processes, with surface mount technology (SMT) and pin through hole (PTH) lines, as well as box build capability.
|
Square Footage:
|
160,000 square feet
|
| Manufacturing Technologies: |
PC Assembly (SMT, PTH, BGA), ICT, Functional Test, Box Build, Depot Repair |
| Manufacturing Lines: |
10 SMT lines, 5 PTH lines, 3 Box
build lines |
|
Certifications: |
ISO 9001, ISO 14001:2004, OHSAS 18001, ANSI/ESD S20.20, ISO 13485:2003, certified, TL 9000 registered, and QSR & TS 16949 compliant.
 |
Guadalajara, Mexico Driving Instructions
Leaving the airport, go straight.
Exit right on "Las Pintas" (the first exit).
Watch for a sign that says "Montenegro Park".
Drive two blocks, then look for the second entrance on the right, which should lead to the second building on the right.
Look for the Security building to check in.
Driving in Mexico can be a challenge to those
not accustomed to it. We recommend that you contact the factory prior to your
visit, so we can provide transportation to and from the factory.
|
